Add or relocate light switches without running new cables
REVBC wireless lighting controls give electricians a faster, cleaner way to add switching, dimming and multi-way control where running new switch wires would be difficult, disruptive or expensive.
Our batteryless wireless switches generate the small amount of electricity they need when pressed, so they require no batteries and no direct wiring. Pair them with a compatible REVBC receiving controller to control lighting and other suitable loads from virtually any practical switch location.
Available through electrical wholesalers across Australia, with local stock, a five-year warranty and direct technical support from REVBC.
Why use wireless lighting controls?
No switch wires
Add a switch without chasing walls, pulling cable through cavities or installing unnecessary wall boxes.
No batteries
The switch generates its own transmission energy when pressed, reducing maintenance and battery replacement.
Flexible control
Create multi-way switching, dimming and control from locations that would otherwise be difficult to reach.
Practical range
Typical range is approximately 20–30 metres indoors through walls and floors, and up to 100 metres outdoors with line of sight.
How the wireless system works
1. Choose the switch
Select an Australian-style mechanism, European-style wall switch, or key fob to suit the application.
2. Select the controller
Use a switching, dual channel switching or dimming controller according to the load and required operation.
3. Pair and control
Pair the switch and controller, then press the switch to send the wireless command. A controller can be paired with up to ten switches.
The system can be expanded later by pairing additional compatible switches and controllers, making it useful for both new installations and retrofit work.
Choose the right wireless products
We offer a range of switching and dimming controllers. They can be paired with one or more wireless switches
We stock three styles of wireless switches. An Australian style switch mechanism as well as European style switches and key fobs.
Our XL bathroom kit will enable you to wirelessly control light, fan and heat from the same switch.
Our wireless transmitters will allow you to convert traditional wired switches and devices to wireless.
Build the system by combining the required switch or transmitter with the receiving controller that matches the load. Ancillary products add remote programming, Wi-Fi control and ready-made application solutions.
Wireless switches and transmitters
| Product range | What it does | Models |
|---|---|---|
| Australian-style switch mechanism | Batteryless wireless switching designed for Australian switch plates that accept 30-series mechanisms. | RBC101 |
| European-style wall switches | One, two and three-gang retractive wireless switches in white and black finishes. | RBC301, RBC302, RBC303, RBC323, RBC331, RBC332, RBC333 |
| Wireless key fob | Portable wireless switching control for suitable applications. | RBC310, RBC320 |
| Wireless transmitter | Converts a conventional wired switch or switching device so it can communicate with the wireless system. | RBC108 |
Wireless receiving controllers
| Model | Controller type | Best suited to |
|---|---|---|
| RBC410 | Single-channel switching controller | Standard on/off control of compatible lighting and electrical loads. |
| RBC412 | Single-channel dimming controller | Switching and dimming compatible phase-dimmable LED loads. |
| RBC414 | Dual-channel switching controller | Independent control of two connected loads from one controller. |
| RBC452 | Momentary switching controller | Momentary control applications, including suitable absence-mode arrangements. |
Wireless accessories and kits
Remote programming dongle for pairing and erasing compatible controllers using the REVBC Android app.
Wi-Fi transmission hub for controlling paired devices from an Android phone within the Wi-Fi zone.
Pre-programmed bathroom kit for wireless control of lighting, fan and heat lamps from one location.
Common wireless lighting control applications
- Add a light switch without running a new switch cable
- Relocate an existing switch with minimal disruption
- Create two-way or multi-way switching quickly
- Add dimming control to compatible LED lighting
- Control lighting across finished, solid or difficult-to-access surfaces
- Upgrade heritage, refurbishment and retrofit projects without unnecessary damage
- Create combined bathroom light, fan and heat-lamp control
- Integrate conventional wired switching devices into the wireless system
Why specify REVBC wireless controls?
- REVBC-branded wireless product range
- Australian stock and strong product availability
- Five-year product warranty
- Direct technical and product-selection support
- Data sheets, installation information and application guidance
- Available through the Australian electrical wholesale channel
Need help specifying a wireless system?
Tell us what needs to be controlled, where the switch needs to go and whether the load requires switching, dimming or momentary operation. We can help identify the compatible switches, controllers and accessories, then direct you to an electrical wholesaler.