Wireless Products
Australian Style Wireless Switches
The RBC101 brings batteryless wireless switching and dimming to Australian style switch plates. It has never been quicker or easier to install a switch. This provides huge labour savings and increased productivity.
The RBC101 has been designed to suit Australian switch plates that accept 30 series mechanisms. Each RBC101 comes with a selection of clip on caps to suit popular switch plates.
Because there are no wires involved, usually there is no need to install a wall box. Just make a hole large enough to accept the switches.
European Style Switches
The RBC300 series switches come in 1 , 2 and 3 gang versions in the same footprint. They are available in white and black. Their European styling and larger key format make them very easy to use.
They are a retractive style switch and a short click will switch loads on and off. When paired with an RBC412 Wireless Dimming Controller, a press and hold will start the dimming. Release the switch when you have reached the desired dim level.
RBC301
RBC323
RBC332
RBC302
RBC310
RBC333
RBC303
RBC331
Wireless Transmitter
The RBC108 wireless transmitter allows you to convert traditional wired switches and switching devices into wireless. This allows them to join our wireless eco system and reap all of the simple connection benefits.
You will no longer be constrained by the difficulty of running wires to make the necessary connections. By adding more of our wireless switches and controllers, then multi-way switching becomes a breeze.
Check out the Resources for the data sheet and application note.
Wireless Controllers
We offer a selection of switching and dimming controllers. They can be paired with one or more wireless switches.
The RBC410 is a single channel switching controller. It has an internal relay to switch the connected live to the load.
The RBC412 is a single channel dimming controller and is intended to dim phase dimmable LED loads up to 100W.
The RBC414 is a dual channel switching controller it has two internal relays to switch the connected live independently to each load.
The RBC416 is a single channel switching controller. It has an internal relay to switch the connected live momentarily to the load when the switch is pressed and released.
When powered up, press the button on the controller for about 3 seconds. The LED will light to show that it is now in paring mode. Then click the desired switch. The LED will go out to show successful pairing. The paring is permanent until you deliberately erase all pairings. Repeat the pairing with other switches to quickly and easily provide multi-way switching or dimming.
The RBC-EYE will allow remote pairing and erasing via your Android device.
RBC410
RBC416
RBC412
RBC414
Ancillary Devices
We have a range of ancillary devices to support and supplement our wireless switching products.
The RBC-EYE is a remote programming dongle to connect to your Android phone. Along with our free App, you are able to remotely program our wireless controllers to work with the switches you select. This includes paring the switches with controllers and also erasing all settings in a controller to have a fresh install.
The RBC-THUB is a remote WiFi Transmission HUB. It allows you to control devices in your WiFi zone using your Android phone and our free App. The App has on screen buttons to emulate wireless switches. The buttons can be paired with any controllers within range to provide convenient remote control.
The RBC-MULTI is an adapter to convert a conventional wired switch plate into a wireless based multi gang switch. Even with just one switch wire in the wall, you can get multi gang wireless switching and dimming from that one location.
The RBC-XL is a kit that is supplied pre-programmed to control lights, fan and heat lamps from the one location. It provides complete wireless control and negates the need for any switch wires.
RBC-EYE
